亚洲一区二区精品,黄色软件视频免费,国产精品国产三级国产专不?,性福宝软件下载

State

Paste

Packing

20KG/drum

Storage

6 months in cool place

Application

Suitable for knitting which dyed with active pigment

Features

1. High fastness

2. Extra white for white discharge, brilliant for colored discharge, better effect than Italian products.

3. High softness

4. SGS detecting passed, no PVC, no heavy metal, no NPEOs.

Mix proportion

White discharge: Discharge printing paste 85-95% + discharge powder 5-10%

Colored discharge: Discharge printing paste 85-95% + discharge powder 5-8% + pigment ?%

Printing process

1. Mixing discharge powder, discharge printing paste, pigment and stirring them evenly.

2. Printing for 1 time (4-6 scrapes per time).

3. Baking for 1-3 minutes or hot pressing for 10 seconds under 160-180℃(within 5-30 minutes after printing).

4. Finish.

Attentions

1. The pigment is max 12%.

2. Please use up the discharge printing pastes which already mixed with discharge powder, otherwise it'll be not stable for the effect. 

3. Don't put the knit discharge powder together with the jean discharge powder, otherwise it'll be on fire.

品名

閃光活性拔印漿         

外觀

乳白色糊狀

包裝

20KG/桶

貯存期

常溫下6個月

應用

使用活性染料染色的綿布

賣點

1. 拔白度好，色拔鮮艷，不用加閃銀并且有閃光效果

2. 手感柔軟

3. 水洗不掉色

4. 符合美國ASTM對鄰苯二甲酸脂和歐盟EN71 Part 3對重金屬含量的要求

調配比例

拔白：拔印漿85-95% + 拔印粉5-10%

色拔：拔印漿85-95% + 拔印粉5-8% + 色漿？%

工藝流程

1. 絲網選用80-100目，用絲印硬方刀75度刮印1次（3刀左右），以印透纖維為佳。

2. 印完后等5分鐘左右（不超30分鐘）待拔印漿滲透布料

3. 160-180度烘烤1-3分鐘或壓燙10-25秒

注意事項

1. 對色牢度要求高的產品，加1-2%固化劑可提高牢度

2. 調入牛仔拔印粉的漿料請在8小時內用完

3. 針織拔印粉和牛仔拔印漿不能放在一起，否則有著火的危險！