一.適用:
適用于棉布,萊卡布,滌綸布,高彈絲毛衣料,羊毛料。
二.外觀及組成:
1、外觀:透明狀漿體,丙烯酸聚合物。
2、布氏粘度:120000-140000PS
3、P H值:6.5-7.5
4、固體含量:45±1
三.特性:
脫金干凈,燙金鏡面效果,手感柔軟,拉伸力一般,連續水洗牢度好。
四.操作應用:
(1)燙金漿與助劑,首先在燙金漿使用時先加入一定量的助劑(2%-3%),調制后的漿料必須馬上使用,不能放置過長時間(6小時內),否則正常溫度下也會發生交聯而影響使用,這是在操作中要引起注意的事項。如果印制中燙金漿過稠科加入適量的水稀釋?zhuān)兄夹圆僮鳌?/span>
(2)建議使用80目—100目網布。把漿料印到基布上,一般印2-3次,特別注意在第一次印制后漿需要干透,然后再印下一次,待干后起網板馬上將裁剪好的燙金紙敷在上面,用壓燙機130℃-160℃壓燙10-15秒。
五:注意事項:
由于印花面料的多樣化,和外界一些不確定的因素,做大貨以前先要做小樣實驗確定以后方可批量生產。未確定情況下使用或操作不當引起的質量問題本公司概不負責。
Otherdetailedinformation
Brand |
CongHui |
Model |
018 |
Viscosity |
/℃ |
PH |
℃ |
Odour |
/ |
Stretch |
100T |
Fineness |
/um |
Appearance |
|
Use |
|
Colorstrength |
100percent |
Fluidity≥ |
/mm |
Shelflife |
12months |
Singlenetweight |
20KG |
Resintype |
/ |
Ionperformance |
/ |
Surfacecolor |
|
一.Substrates:
Cotton,Lycra,polyester,highstretchstainandfleece,woolenmaterials.
二.AppearanceandComposition
1.Appearance:Transparentslurry,Acrylicpolymer.
2.Brinellviscosity:120000-140000PS
3.PHvalue:6.5-7.5
4.Solidcontent:45±1
三.Features:
It has a good combination between printing's appearance and hot gold foil,the hot gold can present specular effect.soft hand feel,general tensile strength,excellent durable wash fastnes.
四.Applicationofoperation
1.Hotpressbaseandadditives,atfirstaddingacertainvolumeofadditives(2%-3%)beforetheusageofhotpressbaseandthebaseshouldbeusedintimeaftermodulated,itcouldnotbeplacedforalongtime(withinsixhours).Otherwise,itwillleadtocrosslinkingsothataffectitsusageunderthenormaltemperature,whichisthemattershouldbepaidattentiontointheoperation.Ifthebaseistoothickintheprinting,youcouldaddwatertodilute.Itisbenefittooperation.
2.Advisingtouse80-120meshscreen.Printingtheslurryontothebasefabric,printing2-3timesingeneral,inthisprocess,youshouldpayattentiontothatbeforeprintinginsecond,thebaseshouldbedrycompletely.Andthenputthepaperonit.Pressat130℃-160℃forabout10-15seconds.
五.Notes:
Duetothediversityofprintingfabricsandsomeuncertainfactorsinoutside,youshouldmakeatestbeforeintheprocessofproduction.Ourcompanywillnotberesponsibleforproblemofqualityundertheuncertaincondition.