亚洲一区二区精品,黄色软件视频免费,国产精品国产三级国产专不?,性福宝软件下载

特性：

耐高溫，特粘，濃度大，泡水不爛臺，不易反白，與市場體系臺膠兼容性強。

使用方法：

若：太粘，可以加3-5%的水進行稀釋后再使用。
①先臺板洗干凈、烘干透 → 再刮刀在臺板上均勻上膠 → 再烘干（一定要干透），方可鋪上布印刷、印花。
②多次使用后可用熱毛巾擦一下，把垃圾清除，可再使用。
③多次使用后，可以用 水和 “水沙皮、水沙紙” 對臺板膠打磨，將表面不粘層祛除，可再使用。
④清洗臺板：只要用熱水加少量洗衣粉清洗或 用酒精擦洗 或 用鏟刀鏟除。
友情提示：據多年市場經驗，極少數印花廠家操作不當出現臺板膠反粘在布片上，其主要原因是①臺板表面漿體鋪的太厚②天氣悶熱引起③臺板膠沒有完全干透。 解決辦法：用烘車將水份烘干，即可。

Other detailed information

Features:

Resistance to high temperature,very stick,large concentration,using water to dip will not damage table,not easy to highlight,good combination with table glue in the market

Usage :

1、If too sticky, could add 3-5% water to dilute and to use .

At first clean and dry the table→using scraper to glue evenly and mildly on table→drying,and then it is well to spread a cloth on table to print.

It could use warm towel to wipe after using many times,clear out the rubbish and then to use.

It could use water and “water sand paper”to polish table paste,to eliminate the non-sticky surface and then to use.

④Cleaning the table:only need to use hot water and little washing powder to wash or alcoholic to scrub or shovel to uproot.

Extra credit:according to many years marketing experience,small amount of printer due to incorrect operation appear the consequence that table paste after tack on the fabric, the main reasons that are spread thick paste on the table due to hot weather the table paste does not dry completely. Solution:using drying car to dry.